bFly StoneLine Device base Standard

bFly StoneLine Device base standard - decoupling of the reference class

With the StoneLine, bFly-Audio presents a new reference class equipment base for decoupling from the underground. It is equally suitable for devices and speakers. It is ideally suited for vibration damped installation of HiFi equipment by decoupling it from the ground.

The core of the new StoneLine base consists of a mineral granulate. The homogeneous composition of this composite provides highly effective decoupling.

The anodised aluminium plate on the upper side is applied spirally by means of a soft polymer and acts
also absorbent. The aluminium acts both as a mechanical insulator and as a screen
against high-frequency radiation.

According to our MLA philosophy (Multi Layer Adjustment) there is an increase in the form of the StoneLine TWIN.
Here we have an additional aluminium plate as well as another "stone plate", i.e. a double StoneLine.

The feet of the StoneLine are based on the proven and very complex PURE absorbers.

The core of these feet is a ring of sorbothane, which is encapsulated between the two aluminium plates, forming a damping air chamber. On the underside there is a special gel cushion, which is designed to be so hard that it optimally supports the other materials in their effect.

Variable sound through additional sound discs

Each StoneLine comes with thin discs of cork rubber. These can be placed under the feet of the StoneLine to give the sound more depth, basic tone and transparency and adapt it to your taste.
Try this also only on one side under 2 feet etc.
It is important that the StoneLine does not wobble.
You should therefore also use these discs to level out uneven surfaces.

The layer structure of the attached feet from top to bottom:

• Natural rubber
• solid aluminium corpus as separating layer
• Cork with natural rubber
• Sorbothanes with parallel air chamber (Details)
• Special-purpose rubber
• Aluminium cover
• Gel pad with defined degree of hardness

Specifications for the bFly StoneLine unit base

• Size S/M with 3 absorber feet
• Standard L and XL with 5 absorber feet
• otherwise 4 absorber feet
• Feet not height adjustable
• For the size S/M the logo is on the short side with 25cm

Dimensions:

• S/M 250 x 350 mm (BxT)
• M 440 x 350 mm (BxT)
• L 500 x 400 mm (BxT)
• XL 560 x 460 mm (BxT)

Height:

• Standard: 30 mm
• TWIN: 45 mm)

weight:

• Standard S: 1,9 kg M: 4,0 kg L: 5,2 kg XL: 7,6 kg
• TWIN S: 3,7 kg M: 7,9 kg L: 10,3 kg XL: 13,3 kg

Load Capacity:

• S bis 55 kg
• M bis 70 kg
• L bis 70 kg
• XL bis 70 kg)

Colors:

• vulkan-schwarz,
• beton-grau,
• Rosenquarz)